background image

FSG 70/FSG 71M

O

PERATION 

M

ANUAL

Page

 

ii

Reprint July  1998

W. Dittel GmbH

Warranty - Copyright - Service

Warranty

The details and data in this operator's manual correspond to the respective state of
technology on the day of printing. We reserve our right to change without prior notice
due to new technological design or corresponding new production technology.

WALTER DITTEL GmbH

 takes no guarantee for these documents with respect to

application and interpretation.

WALTER DITTEL GmbH

 ("Warrantor") warrants to the purchaser of new radio equipment

of the warrantor's manufacture that such equipment shall be free from defects in
material and workmanship for a period of 24 month from the date of delivery.
Equipment and accessory items not manufactured by the Warrantor carry the standard
warranty (12 month) of the manufacturer thereof.

This warranty does not cover equipment which has been
1.  damaged or not maintained as reasonable and necessary,
2.  modified in any way,
3. improperly installed,
4.  repaired by someone other than the warrantor or an authorized

warranty repair station, or

5.  used in a manner or purpose for which the equipment was not

intended.

This warranty shall not extend to incidental or consequential damages arising from
operation of the equipment or from any claimed breach of this warranty.

Copyright 

 1990 

Walter Dittel GmbH

reprint July 1998

All rights reserved. This document contains proprietary information and such
information may not be disclosed to others for any purpose nor used for manufacturing
purposes without prior written permission of the manufacturer 

Walter Dittel GmbH

,

Luftfahrtgeraetebau, D-86899 Landsberg am Lech, Germany.
In this document no mention is made of patents, trademark rights, or other proprietary
rights which may attach to certain words or entries. The absence of such mention,
however, in no way implies that the words or entries in question are exempt from such
rights.

Service

The information in this Operator's Manual does not profess to include all the details of
design, production, or variation of the equipment, or to cover all the possible
contingencies which may arise during operation or maintenance.
Should any unusual problem arise or further information be desired, please contact the

Walter Dittel GmbH

 Service Department, Erpftinger Strasse 36, D-86899 Landsberg

am Lech, Germany.
Since May 1994 the company
ANTON LANG   FLUGFUNK-SERVICE
Pappelweg 26
D-86972 Schwabniederhofen
Germany
Tel:

+49-8861 / 1739

Fax: +49-8861 / 1590
took over all repair work of airband radios of 

Walter Dittel GmbH

, Luftfahrtgeraetebau,

Erpftinger Stasse 36, D-86899 Landsberg am Lech, Germany.
The offered services of company LANG include all repairs, overhaul, maintenance and
inspection according to the regulations of the German Federal Aviation Authority
(Luftfahrtbundesamt, LBA). The company LANG is an authorized repair station,
certified by the LBA under registration number II-A272.

IMPORTANT: 

Also all warranty repairs are done solely by company LANG.

Subject to technical changes

Printed in Germany

03.05.01

Содержание FSG 60M


































Отзывы: