30
31
The new settings will remain in eff ect until changed or until the batteries are
removed or exhausted.
• Start the timer
Press the TIMER START/STOP button
5
. The timer will start and TIMER
ACTIVE
5
will fl ash in the show panel. Between shots, the control panel
will show the time remaining until the next photograph is taken. During the
two seconds before the shot, the camera focuses and the green lamp lights
up. While the shutter is open, the show panel will show the time remaining
until the shutter closes, and the release lamp and RELEASE indicator
8
will
fl ash at one second intervals. If the speaker is turned on, the timer will beep
at one second intervals. After each shot, the remaining number of shots will
be updated.
• End shooting
Shooting will end automatically when the selected number of shots has been
taken. To end shooting before all photographs have been taken, press the
TIMER START/STOP button
5
.
To ensure correct operation, choose an interval at least one second lon-
ger than the exposure time. When using autofocus, set the delay to two
seconds or more and choose an interval at least two seconds longer than
the exposure time to ensure that the camera has time to focus. When using
long exposure noise reduction (available with some digital cameras), the
interval should be at least twice the exposure time. Intervals of 00:00:00 will
automatically be reset to 00:00:01 when the SET button
6
is pressed to put
settings into eff ect. To set the number of shots to - (unlimited), select 1 and
press the arrow button
8
down or select 399 and press the arrow button up.
After adjusting all settings as desired, press the SET button
6
to put the new
settings into eff ect. Timer will issue a beep (if speakers are turned on), and
the SET indicator will go out.
Flashes while shutter
is open
Number of shots
remaining
Shutter is open: Time
remaining until shutter
closes
Shutter is closed: Time
remaining until next
shot
Flashes while
timer is active
