walser Walimex Pro 380 Bi Color RLL-380BV, Инструкция по эксплуатации

Страница: 15 / 22

28 29
WARNING
Danger of fi re through overheating
The device can overheat, if you operate it with covered ventilation slots. The
device itself or easily infl ammable materials in close distance could catch fi re.
■ Don´t cover the ventilation slots of the device during operation.
■
Remove easily infl ammable materials.
■ Please just use spare parts, which are conform to the required specifi cations.
WARNING
Danger of burning on hot parts
■
The illuminant may reach temperatures of up to 40 °C.
■
Don´t touch the parts during operation and cooling down.
■
Please cool down your device before starting any mounting or maintenance
arrangements.
WARNING
Danger of cutting and splintering caused by bursting illuminant
Illuminants can break or splinter when a person or object bangs against the fl ood-
light. Splinters can cause eye and skin injuries.
■ Handle illuminants with care, to avoid breakage.
■
Make sure you do not touch the illuminant by accident when mounting or
replacing accessories.
WARNING
Danger of suffocation caused by small parts
Keep the device out of the reach of children and pets.
WARNING
Precautions when using with rechargeable battery
These can run out or explode, if inappropriately handled. Please observe the follo-
wing safety notes when handling the rechargeable battery for use with this unit:
■ Use only rechargeable batteries mentioned in these operating instructions.
■
Do not lay the rechargeable battery into fi re or expose these to direct heat.
■ To prevent the product from being damaged make sure you have removed the
rechargeable battery if you will not use the product over a longer period of
time or if the rechargeable battery has been discharged.
■
If battery fl uid has come into contact with skin or clothes, fl ush it off immedia-
tely with fresh water.
■
Do not recharge the rechargeable battery unattended.
■ Once the reacharging process is fi nished, disconnect the charger from the
power supply.
3. Unpacking and checking the device
3.1. Carefully unpack the package content.
3.2. Check whether the scope of delivery is complete.
3.3. Please fi nd full scope of delivery for your device on Page 40.
3.4. Check whether the scope of delivery is free of damage.
NOTE
If the scope of delivery is incomplete or damaged, please contact:
info@walser.de
Within the scope of product improvements we reserve the right for technical
and optical changes. Not subject to identifi cation as per RL 2010/30/EC – Not
suitable for illumination purposes in households. Specially developed for photo
and video shooting requirements.