walser walimex pro 23269, Руководство пользователя

Страница: 2 / 12

By purchasing this product you have acquired a high-quality, versatile and
practice-oriented lamp stand / studio stand with long-term quality.
We hope you enjoy using our product
Your team from WALSER
Center column segments with preload!
When opening the tripod locks (4), make sure that you
keep enough distance to the upper end of the stand
and do not bend over. On delivery state, the springs
in the segments of the center column stands under
spring tension. To achieve the minimum packing size,
the internally installed spring damping elements are
slightly pushed together in the delivery state and then
locked. This results in a pretension of the central co-
lumn segments. When the locking clamps are opened,
the center column elements can shoot out up to 20 cm.
This can lead to injuries!
Set up the lamp stand, opening of the center column segments and the tri-
pod legs
Open the tripod locks (4) on the center column locks by turning them counterclock-
wise. Note the previous Note. Then loosen the locking screw of the tripod lock (5).
Pull the tripod legs (8) outwards and press the tripod star (6) downwards. This
spreads the legs. Set the desired angle of the tripod legs. Fix the tripod legs by
tightening the tripod lock screw (5).
Proceed when folding the stand in the reverse order.
WARNING! Risk of squeezing fingers through the struts of the tripod legs (7).
Height adjustment
The tripod is equipped with a telescopic center column that can be extended. The
locking clamps of the center column (3) are fixed by the tripod locks (4). To adjust
the height of the tripod, loosen the tripod locks (4) by turning counterclockwise.
Set to the desired height and tighten the screws again. Press the center column
elements down to check that all locks are fixed correctly. The stand is now ready
to use.
Installation of equipment on the tripod
Using the adapter on the top, you can attach devices such as studio flashes, led
lights, softboxes, poles etc. to this stand. Loosen the mounting screw of the bra-
cket. Insert the holder of your device from above into the tripod adapter (1) and fix
the holder screw.
On the upper end of the mounting adapter (1) a 1/4 inch thread can be used. You
can also attach suitable equipment here.
A further adapter from 1/4 to 3/8 inch (11) is included with this stand. You can also
attach suitable equipment here with the 3/8 inch thread.
Recommended accessories for increased stability
When using heavy equipment with large extension height, we recommend ad-
ditional accessories for stabilization. For this we recommend the use of special
sandbags or weights.
You will find suitable accessory articles in our webshop www.foto-walser.de
Art.-No. / Name
15537 walimex pro sand bag
15876 walimex stand weight 3 kg
13739 walimex weight for rods and boom stands 4,4 kg
ATTENTION!