8
GND
+10V
LED GND
Vout GND
+10V
GND
zum Motor
externer Kontakt
nur wirksam wenn Jumper J2 auf Position EXT ist
0-10V OUTPUT
Jumper LED (J2)
LED ist an, wenn extrener
Kontakt geschlossen ist.
EXT
J2
INT
EXT
J2
INT
LED ist an, wenn Speed 1bis 5
durch den Frontknopf gewählt wurde.
Potentialfreier Anschluss
(nur bei Bedarf)
Der über diese Klemmen angeschlossene Verbraucher z.B.
Signalleuchte braucht einen eigenen Netzanschluss mit
eigener Absicherung.
Trimmer Stellschrauben
zum individuellen Einstellen der Stufen 1-5
8.2. Speed controller WPO infinitely variable
Wiring diagram
3 = Us supply voltage (0-12 VDC)
4 = + output voltage (0)
5 = - ground
1,2 = Dry contact for remote ON/OFF connections
Cable cross-section: max. 2.5 mm2
c o n t r o l t h e p e r f e c t s p e e d
switching, controls, sensors | S-72
04/03/2008
MTP010 |
potentiometer
Potentiometer mounted in an IP44 splash water proof housing.
Can be used for inset mounting as well as for surface mounting.
Features
Switch rating: 4 A / 250 Vac - 10 A / 12 Vdc
<
Resistance value: 10 KOhm
<
Wiring diagram
Dimensions & fixing
65
24
82
82
62
62
weight
MTP010
145 gr
9. Commissioning
Only if commissioning has been carried out correctly and written proof of this is provided, is the warranty
valid.
Safety instructions
Commissioning may only be carried out by appropriately qualified persons, for details, see table Qualification
Requirements
