WALPOL WDV-A 355 EC Скачать руководство пользователя страница 4

4

Table 1 Qualification

Actions

Qualification

Storage, operation, transport, cleaning, 

disposal

Trained personnel (see following notes)

Electrical connection, commissioning, 

electrical isolation

Qualified electrician or persons with 

corresponding qualification

Installation, disassembly

Assembly specialist or persons with 

corresponding qualification

Maintenance

Qualified electrician 

or persons with 

corresponding 

qualification

Assembly specialist 

or persons with 

corresponding 

qualification

Repair

Qualified electrician 

or persons with 

corresponding 

qualification

Assembly specialist 

or persons with 

corresponding 

qualification

Note

The operator must ensure that the personnel have been instructed in the 

operation and have understood the operating instructions. If you are unsure, 

please contact Walpol or our representatives.

2.2.  Personal protective equipment

Wear protective equipment during any work in the vicinity of the fan.

•  Protective clothing
•  Safety shoes

•  Protective gloves
•  Safety helmet

•  Safety goggles
•  Hearing protection

2.3.  The 5 safety rules for working in and on electrical installations

1. Disconnecting (all-pole 

disconnection of an electrical 

system from live parts)

2. Secure against restarting
3. Determine freedom from 

voltage

4. Grounding and shorting
5. Cover or fence off adjacent live 

parts

3.  Warranty 

For warranty claims to be valid, the products must be properly connected and operated and used in accordance with the 

data sheets. Prerequisites are also a fully completed maintenance plan and commissioning report, which are requested by 

Walpol in the event of a warranty claim. The commissioning report is part of this document, the maintenance plan is to be 

prepared by the operator, see chapter 13.3 Maintenance 

4.  Delivery, transport, storage

Safety instructions

Warning: Danger due to rotating fan blades

• 

Prevent unauthorized persons from entering by security personnel or an access guard. 

Содержание WDV-A 355 EC



















Отзывы: