Product Manual WDC400
Wallgate
2014
10
|Revision 3.0
The standard unit is preset at the factory with default settings. You can change these
settings as necessary to deliver customised cell or room services. All the programming is
done through the keypad on the front panel, or through a PC workstation over the network
link.
As all the settings are retained in non volatile memory, the settings are not lost if the power
supply to the unit is disconnected. Customised settings from one unit can be easily copied to
other units using a PC workstation over the network link.
The electronic water management and
Lockout
features are designed to conserve water
and prevent misuse of the water services. The user interface is structured to ensure each
control valve has independent control and can be easily adjusted and viewed on the
illuminated display.
The user operates Piezo pushbuttons or infra red hand sensors to open and shut the water
supply to various services such as the basin, shower and WC. The cell/room lights are
controlled by either momentary or latching toggle/rocker switches. You can manage the
control unit in real time through a PC connected to the network (Comms) sockets.