Wallgate PSH-25-PNEU, Руководство по эксплуатации продукта

Страница: 14 / 16

Revision 1
14
11. User and Maintenance Instructions
The PSH-25-PNEU water dispenser has been designed & manufactured from quality
materials. If these instructions are followed, the unit will give reliable efficient service.
If you need any further information or advice, please contact:
Wallgate Ltd, Crow Lane, Wilton,
Salisbury, Wiltshire, SP2 OHB.
Telephone: (01722) 744594 - Fax: (01722) 742933.
The installer must pass these instructions & the installation & commissioning
instructions to the customer.
11.1 Operation

To use the water dispenser, press the pneumatic push button located on the
front of the basin that operate the flow of water. For the hand wash operation
once the cycle is activated it will run for 5 seconds & stop.

If the time cycle of 10 - 15 seconds requires to be adjusted, then this can be
done by turning the slotted adjusting screw situated next to the airline nipple
on the valve. Clockwise will increase the time setting, anti-clockwise will
decrease the time setting. The valve is adjustable from 5 seconds to 5
minutes.
11.2 Maintenance

Wallgate operates a comprehensive service package, details of which can be
obtained from our “After Sales Service Department”. A full spare parts facility
is also available.

General wear will mainly affect the components in contact with the water
dispensing and the basin waste outlet. If the unit is installed in a hard water
area, then lime scale removers should be used on the basin and water nozzle
components. The water nozzle can be dismantled & immersed in a de-scaling
solution for cleaning. The basin waste is fitted with a grille which shall require
regular cleaning to remove build-up of soap residue, hairs, lime scale etc. A
cleaning brush is provided to assist in cleaning between the grille vanes which
must be done on a regular basis depending upon product usage. Spare parts
can be obtained as shown in the spares list table below.

Any service or repair work must be carried out by a qualified engineer, which
during the warranty period must be a Wallgate engineer or appointed service