Wallenstein WXR545PL Скачать руководство пользователя страница 17

Страница: 17 / 42

WXR545PL

Trailer Wood Splitter

Safety Signs

Safety

3.2 Safety Sign Explanations

1. Caution

Keep feet away from falling split wood.

Always wear steel toed foot wear while

machine is operating to avoid serious

personal injury.

2. Caution

Pinch point / crushing danger! Keep

your hands away from all moving

parts during and after split operation!

Never try to clear a jammed log with

your hands! Wait for all moving parts

to come to a complete stop before

loading or clearing obstructions.

3. Caution

Refer to the operator's manual.

Read and understand ALL safety

and operating instructions. Read and

understand ALL safety labels located

on the machine.

4. Caution

Personal Protective Equipment

(PPE) is required when operating this

machine. Failure to wear PPE can

result in personal injury

3.3 Replacing Damaged Safety

Signs

Keep safety signs clean and legible at all times.

Replace safety signs that are missing or have

become illegible.

Parts that were replaced with a safety decal on them

must also have the safety sign replaced.

Replacement safety signs are available from your

authorized Distributor or Dealer Parts Department or

the factory.

3.3.1 How to Install Safety Signs

Ambient temperature must be above 50 °F (10 °C) to

install decals.

Clean and dry the installation area.

Determine exact position before removing the backing

paper.

Peel back the corner of the backing paper.

Align the sign over the specified area and carefully

press the small portion with the exposed sticky

backing in place.

Slowly peel back the remaining paper and carefully

smooth the remaining portion of the sign in place.

Small air pockets can be pierced with a pin and

smoothed out using the piece of sign backing paper.

Содержание WXR545PL











































Результаты поиска

Содержание WXR545PL

Отзывы:

Похожие инструкции для WXR545PL

Бренды по названию

Популярные бренды

Wallenstein WXR545PL, Руководство оператора

Результаты поиска

Содержание WXR545PL

Отзывы:

Похожие инструкции для WXR545PL

Бренды по названию

Популярные бренды