background image

8

2     SAFETY

SAFETY ALERT SYMBOL

Why is SAFeTY important to you?

The Safety Alert symbol identifies 

important safety messages on the 

Wallenstein Woodsplitter and in the 

manual�  When you see this symbol, 

be alert to the possibility of personal 

injury or death�  Follow the instruc-

tions in the safety message�

This Safety Alert symbol means

 

ATTENTION!  BECOME ALERT!  

YOUR SAFETY IS INVOLVED!

  Accidents Disable and Kill

  Accidents Cost

  Accidents Can Be Avoided

3 Big Reasons

 

WARNING 

  Indicates a potentially hazardous 

      

DANGER 

-   Indicates an imminently hazardous 

 

CAUTION 

-  

 Indicates a potentially hazardous 

situation that, if not avoided, may 

result in minor or moderate injury�  

It may also be used to alert against 

unsafe practices�

situation that, if not avoided, could 

result in death or serious injury, and 

includes hazards that are exposed 

when guards are removed�  It may 

also be used to alert against unsafe 

practices�

situation that, if not avoided, will re-

sult in death or serious injury�  This 

signal word is to be limited to the 

most extreme situations typically 

for machine components which, 

for functional purposes, cannot be 

guarded�

SIGNAL WORDS:

Note the use of the signal words 

DANGER,

 

WARNING 

and 

CAUTION

 with the safety 

messages� The appropriate signal word for 

each message has been selected using the

following guide-lines:

If you have any questions not answered in this manual or require additional copies or the manual is dam-

aged, please contact your dealer or Wallenstein, 4144 Boomer Line, St� Clements, ON, N0B 2M0�  Phone 

(519) 699-9283 or Fax (519) 699-4146�

Содержание WX510














































Отзывы: