background image

 Safety

QC620

Skid Digger

Safety

8

2.4  Safety Rules

• 

It is the operator's responsibility to read, 
understand and follow ALL safety and 
operation instructions in this manual. If 
you do not understand any part of this 
manual and require assistance, contact 
your dealer, distributor, or Wallenstein 
Equipment.

• 

The operator of the skid digger must be a responsible, 
physically able person familiar with machinery and trained 
in this machine's operation. 

• 

Learn the meaning of all the safety signs (decals) that 
are on the machine. For definitions, see 

Safety Sign 

Explanations on page 15

.

• 

Review safety related items annually with all personnel who 
will be operating the machine or performing maintenance.

• 

Do not expect a person to operate the manure spreader 
who has not read all the instructions and safety information 
in this manual. An untrained operator is not qualified and 
exposes themselves and bystanders to possible serious 
injury or death. 

• 

Never consume alcohol or drugs prior to or while using 
this equipment. Alertness or coordination can be affected. 
Consult your doctor about using this machine while taking 
prescription medications.

• 

Wear appropriate PPE when using or servicing this 
machine. This includes, but is not limited to:

 

-

A hard hat 

 

-

Hearing protection

 

-

Protective footwear with steel toes and slip resistant 
soles

 

-

Protective glasses, goggles, or a face shield

• 

Wear hearing protection on a full-time basis if the noise in 
the operator's position exceeds 80 dB. Noise over 85 dB 
on a long-term basis can cause severe hearing loss. Noise 
over 90 dB adjacent to the operator over a long-term basis 
may cause permanent, total hearing loss. 

• 

Keep a first-aid kit available for use should 
the need arise and know how to use it. 

• 

Keep a fire extinguisher available for use 
should the need arise and know how to 
use it.

• 

Do not allow long hair, loose fitting clothing, or jewelry near 
the equipment.

• 

Know how to stop the equipment quickly in the event of an 
emergency. For instructions, see 

Stop in an Emergency on 

page 24

.

• 

Do not install the skid digger on the skid steer if the total 
skid steer and equipment weight exceeds the rollover 
protection structure (ROPS) weight certification.

• 

Have underground utilities located and marked before 
starting to dig. Take care not to contact overhead and 
underground obstructions during operation.

• 

Only operate the machine in daylight or good artificial light.

• 

Always wear the seat belt when operating 
the skid steer. Serious injury or even 
death could result from falling off the skid 
steer, particularly during a rollover when 
the operator could be pinned under the 
machine. 

• 

Do not risk injury or death by ignoring good safety 
practices. 

2.5  Equipment Safety Guidelines

• 

The skid digger is not intended for use or transport on 
public roadways. For more information, see 

Transport on 

page 25

.

• 

Do not dig under the skid steer. A cave-in could result 
causing the machine to fall into the excavation.

• 

Never operate the machine with any shield removed. Keep 
all shields in place. If shield removal is required for service 
or maintenance, replace the shield prior to using the 
manure spreader. 

• 

Replace any safety or instruction signs (decals) that are not 
readable or missing. 

• 

Do not modify the equipment in any way. Unauthorized 
modification may result in serious injury or death, and may 
impair the function and life of the equipment. Unapproved 
modifications void the warranty. 

• 

Make sure that the machine is properly stationed, adjusted, 
and in good operating condition.

• 

Do not exceed the skid steer lift capacity. Overloading can 
cause structural damage and lead to unsafe operating 
conditions.

• 

Never exceed the limits of a piece of machinery. If the 
machine's ability to do a job or to do it safely is in question 
– 

DO NOT TRY IT

.

Содержание QC620





































Отзывы: