background image

01416

4

3

1

2

Fig.  13 – 

LXG420R, LXG430R, and LXG430RP Electrical Harnesses

1.  Control Valve Connectors
2.  Valve Harness

3.  Remote Grapple Control Box
4.  Power Connection

5.3.2  LXG420R, LXG430R, and LXG430RP 

Electrical Connections

The LXG420R and LXG430R require 12 VDC from the skid steer 
cab to power the hydraulic control valve for the grapple and 
rotator.

The LXG430RP requires 12 VDC from the skid steer cab to 
power three hydraulic control valves for the grapple and rotator, 
the hydraulic winch, and the extendable boom.

IMPORTANT!  When assembling wire harnesses, apply 
a thin coating of silicone dielectric grease to the harness 
connectors. The grease helps to stop any possibility of 
future corrosion.
Clean the ends, then apply a small amount to the surfaces of 
the connectors where they meet. Wipe off any excess.

• 

Connect the harness to the control valve on the grapple. 
Tie-wrap the harness to the hoses and route along the 
boom to the cab. Secure the harness to avoid chafing or 
pinching.

• 

In the cab, mount the control switch box in a convenient 
place. It should be positioned to easily toggle back and 
forth when operating. 

• 

Connect the harness to a 12 VDC power supply, for 
example a cigar lighter.

4

3

1

2

         Z9

48

27

400

Series

01494

LXG420R and LXG430R

LXG430RP

Installation

LXG400 Series

Log Grapples

24

Содержание LXG400 Series





















































Отзывы: