Wallenstein FX40 Скачать руководство пользователя страница 29

Страница: 29 / 48

IMPORTANT! Pull firmly on the clutch rope to

reduce slipping and wearing clutch brake pads.

Release the clutch rope when the load is in the

desired position. Disconnect from the choker chain.

Winch additional logs as required.

•

Several logs can be hooked up and winched in at

one time by means of keyhole sliders on the cable.

•

Choker chains have a probe on the end that makes

it easier to pass the chain underneath the log.

7.9 Skidding Logs

Points to Remember:

•

Raise winch frame up above the ground to clear

obstacles when skidding.

•

Use a log chain or choker chain to connect to the

winch cable. Do not use a rope or strap to prevent

breakage from abrasion or snagging.

•

Skid logs after they are winched up to the tractor.

Be cautious of hills and rough terrain.

Turn the tractor PTO off.

Apply the winch drum lock.

00518

Fig. 29 –

Winch Drum Lock

Raise the winch and drive the tractor forward to

pull the load to the desired location.

To allow the winch drum to free-wheel, disengage

the drum lock.

Skidding over Rough Ground

•

Unlock the winch to let the cable drum free wheel.

Leave the log hooked up to the winch.

00526

Fig. 30 –

Unlock Winch Drum

•

Drive the tractor over the rough ground, then stop

the tractor and winch the log through.

•

Lock the winch drum and continue skidding.

00522

Fig. 31 –

Skidding over Rough Ground

Tractor Gets Stuck

•

Unlock the winch to let the cable drum free wheel.

•

Drive the tractor to firm ground, then winch the

load back in.

•

If the tractor cannot be moved, drop the load and

winch the tractor out.

FX40

PTO-driven Log Skidding Winch

Operating Instructions

Содержание FX40

















































Результаты поиска

Содержание FX40

Отзывы:

Похожие инструкции для FX40

Бренды по названию

Популярные бренды

Wallenstein FX40, Руководство оператора

Результаты поиска

Содержание FX40

Отзывы:

Похожие инструкции для FX40

Бренды по названию

Популярные бренды