Wallenstein FX110R Скачать руководство пользователя страница 8

Страница: 8 / 50

Safety

FX66, FX85/R, FX110/R, FX140/R

PTO Skidding Winch

Safety

2. Safety

2.1 Safety Alert Symbol

This Symbol means:

ATTENTION! BE ALERT !

YOUR SAFETY IS INVOLVED !

The Safety Alert Symbol identifies important safety

messages on the Wallenstein product and in the

manual.

When you see this symbol, be alert to the

possibility of personal injury or death! Follow the

instructions in the safety message

2.2 Signal Words

The signal words

DANGER

WARNING

and

CAUTION

determine the seriousness level of the warning

messages in this manual. The appropriate signal word

for each message in this manual has been selected

using the following guidelines:

DANGER –

Indicates an imminently hazardous situation that,

if not avoided,

will

result in death or serious injury.

This signal word is to be limited to the most extreme

situations typically for machine components which, for

functional purposes, cannot be guarded.

WARNING –

Indicates a potentially hazardous situation that, if not

avoided,

could

result in death or serious injury, and

includes hazards that are exposed when guards are

removed. It may also be used to alert against unsafe

practices.

CAUTION –

Indicates a potentially hazardous situation that, if not

avoided,

may

result in minor or moderate injury. It may

also be used to alert against unsafe practices.

IMPORTANT

– To avoid confusing equipment

protection with personal safety messages, a signal

word IMPORTANT indicates a situation that if not

avoided, could result in damage to the machine.

NOTE: (plus text) – indicates an additional

explanation for an element of information.

Содержание FX110R



















































Результаты поиска

Содержание FX110R

Отзывы:

Похожие инструкции для FX110R

Бренды по названию

Популярные бренды

Wallenstein FX110R, Руководство оператора

Результаты поиска

Содержание FX110R

Отзывы:

Похожие инструкции для FX110R

Бренды по названию

Популярные бренды