21
4�5�2 SHREDDER FEED:
The shredder intake is designed with a spring-loaded shredder chute flap to control the material in the
hopper when feeding into the shredder rotor, and to prevent material from flying out while it is being
shredded.
The flapper handle on the
engine side of the shredder
hopper controls the position of
the shredder chute flap. You
can control how much and how
fast the material is delivered into
the shredder by varying the flap
opening.
1.
Move the flapper handle
down to open the gate and
allow the material to drop into
the shredding rotor.
2.
Release the flapper handle
and the spring will return the
gate into its closed position.
Flapper
Handle
Shredder
Chute Flap
4�5�3 FEED CHUTE GRAB HANDLES:
The feed chute features grab handles. To move the chipper to a new work zone, use the grab handles
and carefully tilt the machine back until the machine base lifts off the ground, and is securely resting . The
machine is balanced to make it easy to move the machine this way.
Ensure the machine is secure from movement during chipping operation.
Grab
Handles
