background image

WXR720/L, WXR740/L
Trailer Wood Splitter

Operating Instructions

27

00623

1

2

Fig.  18 – 

Rotate Splitter to Vertical

6.10  Starting the Engine

 CAUTION!

Before starting engine, review the operating and 

maintenance instructions in the engine manual.

W019

 CAUTION!

Hearing loss hazard. Prolonged 

exposure to loud noise may cause 

permanent hearing loss. Use suitable 

protection while operating the 

machine.

W016

Make sure the wood splitter is set up to work and otherwise 
ready to run. 

1. 

Slide the fuel valve lever toward the block to turn fuel ON.

01075

Fig.  19 – 

Fuel Valve Lever

2. 

If the engine is cold, close the choke (push choke lever 
to the left). To start a warm engine, leave the choke open 
(lever pushed to the right).

00188

1

2

3

Fig.  20 – 

Choke Lever

1.  Choke Lever
2.  Choke OPEN
3.  Choke CLOSED

3. 

Move the throttle lever away from the MIN. position, about 
1/3 of the way toward the MAX position.

00191

1

Fig.  21 – 

Engine Throttle

1.  Throttle Lever

4. 

Turn the engine ignition switch ON.

00187

Fig.  22 – 

Ignition Switch

5. 

Pull the starter grip out lightly until resistance is felt, then 
pull briskly in the direction of the arrow as shown below. 

Содержание 720124













































Отзывы: