WallboxOK UP, Руководство пользователя и инструкция по установке

Страница: 8 / 13

8
SUMMARY OF RETROILUMINATION LIGHT SIGNALS
GREEN
The EVSE is connected and is waiting
to connect electric vehicle.
WHITE The EVSE is ready to charge. The
EVSE is connected to the car,
but is
waiting the authorization of the car.
BLUE
The EVSE is charging. The cable is
connected to the vehicle.
4.2 CHARGE AMPS SELECTION
The final Customer can select Amp Rate of the EVSE trought the Display. The Amp Rate can’t
be change when the car is charging.
The vehicle will charge at that recharging speed or lower depending on the maximum
recharging capacity that the vehicle has and the% of load it is in. The maximum selected speed
must be in accordance with the installation performed.
Amperes 6 12 14 16 18 20 22 24 26 28 32
1 Phase Power (kW) 1,4 2,8 3,2 3,7 4,1 4,6 5 5,5 6 6,4 7,7
3 Phase Power (kW) 4,2 8,4 9,7 11 12,2 13.8 15 16,5 18 19,2 22
Int. Circuit Breaker (A.) 10 16 16 16 20 20 25 25 32 32 32
Minimum cable section (mm2)
2,5 2,5 2,5 2,5 4 4 6 6 6 6 10
The circuit breaker you need to install and the supply section must be selected by a specialist
electrical technician. See point 6.
4.3 A CCESS TO THE CHARGER MENU
A series of parameters can be modified in the equipment menu.
To access the menu we will follow the following procedure:
Without connecting the electric vehicle (idle mode), press the 2 buttons simultaneously.
You can scroll through the menu with the right - left buttons. To exit the menu simply press
the button on the right until we automatically exit the menu. To access it again follow the
procedure we just explained above.
1st Parameter : By default the equipment does not allow to modify the load intensity when the
equipment is loading the vehicle. Modifying this parameter will allow you to modify the curve
of the load intensity while the vehicle is charging. ( The vehicle must be compatible with this
option so that the charging intensity will wash while it is being charged.)
Press 3-4 seconds until the menu is
accessed
By default, the recharging intensity will be fixed.
To
change to NO, press the button on the right for 3-4
seconds until you see a change in the chosen option.