WallboxOK UP, Руководство пользователя и инструкция по установке

Страница: 4 / 13

4
2 IMPORTANT INFORMATION
2.1 SAFETY INTRUCTIONS
Warning!
Not observing the safety instructions can result in risk of death, injuries and damage to the
device! WALLBOXOK assumes no liability for claims resulting from this!
•
Electrical hazard / fire hazard!
Never use damaged worn or dirty charging plugs. first time tuning on the electrical
charging station must be carried out exclusively by competent and qualified technical
personnel, fully responsible for compliance with the installation regulations and
existing standards.
• Electrical hazard / fire hazard!
Never use damaged, worn or dirty charging connectors.
•
The owner must ensure that the charging station is only ever operated in perfect
condition:
- The charging station must be checked regularly for faulty sockets and
connectors and damage to the housing (visual inspection).
- A damaged charging station must be switched off immediately and replaced.
- Repair work to the charging station is forbidden and may only be performed by
the manufacturer (replacement of the charging station)!
- Do not carry out any unauthorized conversion work or modifications to the
charging station!
- Do not remove any notices on the device, such as safety symbols, warning
notices, rating plates, nameplates or cable markings!
• The charging station does not have its own power switch! The RCD circuit breaker and
the line circuit breaker of the building installation serve as main connectors.
•
No extension cables are permitted for connecting an electric vehicle to the power
supply device for electric vehicles.
Only electrical vehicles or their chargers may be connected. No connection of other
loads is permitted (electric tools etc.)!
• Read the information and instructions for your vehicle carefully before you λ charge
the vehicle using the charging station.
•
Ventilation: A number of vehicles require an external ventilation system in the interior
areas due to the possible creation of toxic or explosive gases during the charging
procedure.
• Unplug the charging cable by pulling on the connector, never on the cable.