Wallbox PULSAR, Руководство по обслуживанию

Страница: 16 / 17

16
Insert the power input cables in their
connectors and tighten the screws one by
one in a sorted manner. Get the front plastic cover and connect the
communications cable to the Power board.
7.
8.
Restore the power supply to the charger.
Insert and then tighten the Torx screw in the
bottom of the charger to secure the front
plastic cover.
10.
11.
Position the top clip points of the front plastic
cover on the charger’s body. Clip first the
lateral clips to the charger´s body and then
the bottom clips. Make sure the 8 clips are
properly placed.
9.
Check that the power input cables are fixed properly.