Wallbox Pulsar Plus, Руководство по установке

Страница: 4 / 29

6 7
EN EN
Components
Required tools
Included mounting parts
T20 Screwdriver
or Bit
Torque
Screwdriver
(Hardwired
version)
Small, flat
Screwdriver
Phillips Screwdriver
or Bit
x2
ø6 x 50mm
Phillips Screws
x2
ø5 x 40mm
Phillips Screws
PULSAR PLUS
Amperage Reduction Label
Input/Output:
208/240VAC, 60Hz, 16A Input/Output:
208/240VAC, 60Hz, 16A
Input/Output:
208/240VAC, 60Hz, 20A
Input/Output:
208/240VAC, 60Hz, 24A Input/Output:
208/240VAC, 60Hz, 24A
Input/Output:
208/240VAC, 60Hz, 32A Input/Output:
208/240VAC, 60Hz, 32A
Input/Output:
208/240VAC, 60Hz, 40A Input/Output:
208/240VAC, 60Hz,40A
Input/Output:
208/240VAC, 60Hz, 20A
20A
EV Charger
50A
EV Charger
40A
EV Charger 30A
EV Charger
25A
EV Charger
20A
Save this label sheet for future use.
Wallbox Chargers S.L.
Enclosure Type 3R
PN: PUP1-U-1-5-N-002-A
22ºF to 104ºF (-30ºC to 40ºC)
08/2020 Made in Spain SN: 123456 UID: abcdefgh
Input/Output:
208/240VAC, 60Hz, 48A
Wallbox Pulsar Plus
with Charging Cable
Holster Amperage Reduction
Labels
Electric Drill
3/8” (8 mm) bits
Pencil Stud
Detector
NEMA
14-50P
240V
outlet
Ground facing down
Or electrical material
to hardwire
Spirit Level
Measuring
Tape
x2
T20 4 x 10mm
Torx Screws
(Hardwire version)
Caution.
Risk of electric
shock.
Flying debris,
risk of eye
injury.
Risk of foot injury. Sharp element,
risk of injurious
cuts
.
Ground earth
connection
required.
Safety icons
FCC Note
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna of the affected ratio or television.
• Increase the separation between the charger and any affected devices.
• Connect the charger to an outlet on a circuit different from the one to which any
affected devices are connected.
• Consult the dealer or an experienced radio/TV technician for help.
GETTING STARTED
Package contents
Installation Guide
x1
Screw Plug
(Plug-in
version)
x4
ø8 x 40mm
Wall Anchors
ø3.5 x 9.5mm
Philips Screws
x2