Wallbox DC Charger 1ph, Руководство по установке

Страница: 11 / 20

11
Opening the Package
Put the package with the “Wallbox” text on top, on firm ground within an area
of at least 2m by 2m free of obstacles. Carefully open the package and remove
the parts. Caution because of the weight of the object.
Drill
• Draw the four mounting holes using the wallplate as a template. Take special care to keep the
template level. The use of a spirit level is highly recommended.
• Draw the two mounting holes using the plug holder as a template. Take special care to keep the
template level. The use of a spirit level is highly recommended.
• Recommended distances are shown in the following picture:
• Drill the six anchor hole marks to the diameter specified for the selected
equipment for the installation. For installation on wood, brick and concrete
walls use the equipment delivered with the charger.
Mounting
1. Installing the Wallplate and the power supply connection
Always check that the power supply is off and no
voltage is present at the cables.
In the case that your Wallbox uses the rear input follow the steps in
section 1.a. Otherwise go to section 1.b.:
Connector
box
Wallplate
Picture 0.2
Picture 1.1
280,00
278,00
30,00
100,00
205,00
6,05
6,05
6,05
6,05
6,3
6,3