14
11.5 M otor Unlock/Lock
After successful code-matching, move the left & right sticks down and toggle them outward until the motor rotates.
After the motor rotates, please immediately release sticks.
(Figure 1)
M otor Unlock
M otor Lock
When the aircraft is landed, move the throttle stick down and hold for 5 seconds. The motors will then stop.
(Figure 2)
1) M ake sure that the GPS signal is received.
2) Only when “C onnected” displays on the upper bar of the main interface of the APP, you can
perform APP operation.
3) Please switch the flight mode before taking off (check the current flight mode with the APP).
4) Please unlock motors before takeoff(please see 11.5 for the unlock method).
12.0 Flight Control
Auto Takeoff is active only under GPS mode.
Auto takeoff default to 3m altitude, and it can be removed by pushing the throttle to midpoint or
above,whenever manual control over the throttle is needed.
After Auto takeoff, please switch the flight mode of the remote control according to your needs.
M anual Takeoff or AUTO Takeoff (Remote Controller Operation)
M anual takeoff:
Perform a combination stick command to
start the motor and then slowly push the throttle stick upward
to take off.
Left and right stick
(start the motor)
Switch to “Take off”
position and the aircraft
will take off automatically.
After taking off,
turn the switch to
the middle position.
Aircraft in
GPS mode
Common
GPS
Manual
Take off
Landing
Take off
Landing
Left and right stick
(Start the motor)
Throttle stick
(American hand is left stick)
AUTO Takeoff:
After the motor is unlocked, the flight mode switch In GPS mode, the auto take-off/landing switch
to the “Take off” position and the aircraft automatically takes off. Hover 3 meters from the ground, please turn
the auto take-off/landing switch back to the middle position.
Figure 1
Figure 2
Walkera All Rights Reserved
Quick Start Guide