English
- 18 -
First Time Installation
When the TV set is operated for the first time, the
following menu screen will be displayed:
Select your Country, Language and Text
language by using “ ” or “ ” and “ ” or “ ”
buttons. Press OK or RED button to continue.
To cancel, press the BLUE button.
The following menu will be displayed during the
automatic tuning:
After APS is finalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
the program table.
Do not turn off the TV while initializing firs time
installation.
Input Selection
Once you have connected external systems
to your TV, you can switch to different input
sources.
• Press “
” button on your remote control for
directly changing sources.
or,
• Select “
Source
” option from the main menu
by using “ ” or “ ” button. Use then “ ” or
“ ” button to highlight an input and press
“ ” button to select.
Note
: You can mark desired source options by pressing
the
OK
button. Therefore, when
“
”
button is
pressed, only the marked source options will be
available (except for the TV source)..
Basic Operations
You can operate your TV using both the
remote control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press “
” button to decrease volume
or “
”button to increase volume, so a
volume level scale (slider) will be displayed
on the screen.
Programme Selection
• Press “
P/CH +
” button to select the next
programme or “
P/CH -
” button to select the
previous programme.
Viewing Main Menu
• Note: Press “
” / “
” buttons at the
same time to view main menu. In the Main
menu select sub-menu using “
P/CH -
” or
“
P/CH +
” buttons and enter the sub-menu
using “
” or “
” buttons. To learn the
usage of the menus, refer to the menu system
sections.
