Instruction & Technical Manual | 31
11.6 Purge plug removal
1. Remove front panel of dryer as described in
11.5 and locate purge plug in upper valve
block.
4. Orifice in purge plug can be cleaned with
warm soapy water. Do not use sharp
implements or tools.
2. Remove purge plug fixing screw from upper
valve block.
5. After thoroughly drying purge plug, push
back into port in valve block. Ensure that ‘o’
rings are in place and in good condition.
3. Remove purge plug from port in upper
valve block.downwards.
6. Replace and tighten purge plug fixing screw
in upper valve block.
