9
FUNCTION BUTTON
ENTER:
Press
ENTER
button to set the parameter of count down. When the belt stop running
which press an hold this button for 3 seconds to reset all data which is the parameter value
of accumulating. To confirmer stride length setting.
START:
Press
START
button to begin training.
STOP:
Press
STOP
button to control stop training.
SPEED
:
Press
FAST
button to increase your speed, each increment is 0.1KPH.
SPEED
:
Press
SLOW
button to decrease your speed, each decrement is 0.1KPH.
STRIDE LENGTH:
To set one step stride length, to adjust the range from 30 ~ 99 centimeter. (SL.)
DISPLAY:
To show workout information time, distance...etc..
SAFETY KEY:
Attach the safety key in its position to power on the computer. When safety key is pulled
away from its position, the computer will shut down automatically.
DIRECT SPEED KEYS:
3 preset buttons for direct speed:
1kph/1mph, 2kph/2mph, 3kph/3mph.
User can press the 3buttons, mentioned above, at any time, to start treadmill and treadmill will
automatically adjust to press speed.
Quick-Start Operation (Manual):
STEP 1:
Attach the
Safety key
to console then press any button to wake display up (
if not already on
),
the screen will be turn on displaying. (Before training, you could enter the setting of count down,
please see the STEP 6.)
STEP 2:
Press the
START
button to begin belt movement, before training; the console will be a 3 seconds
finalcount down and a beep sound for short time. Using the
SPEED
/
keys to adjust the desired
speed (on console)at any time during training.
STEP 3:
Press
ENTER
button to see the value of parameter, which includes speed, time, distance, calories or
scan.If chooses the scan mode that will take turns to display all value of parameter every 5 seconds.
STEP 4:
While training, you can press
STOP
button to stop your workout or pull safety key away from its
position to shut down the computer. If you want to resume your workout, you can press
START
button
again and all previous data will resume counting.
STEP 5:
After training, to press
DISPLAY
button to display the accumulating data for speed, time, distance and
calories that will be memorize during training. If you want to repeat your workout, press
START
button
to begin the treadmill again.
STEP 6:
Before training, press
ENTER
button to enter the setting of count down which include setting count
down Time, whose range is from 20: 00 to 99:00, Step is from 1000 to 9999, Distance is from 1.00 to
99.00 or Calories is from 50.0 to 999.0. During setting, you could press
SPEED
/
to adjust the value
or press
ENTER
button to enter next step whether you set or not. When you set multi-parameter,
just single parameter can to count down in last setting, press
START
to execute the setting. When
parameter has gone to zero, the treadmill will stop immediately, this workout summary will be showed
on screen.
ERROR MESSAGE:
1.
LS
: Treadmill doesn’t receive the speed signal for 8 seconds.
2.
E1
: Memory of console malfunction or CPU accessing problem.
