WalkAbout Mother Bin Скачать руководство пользователя страница 28

Страница: 28 / 101

OPERATION

Walkabout Mother Bin Operator Manual

20174000r1 (04-2022)

2.9 LOADING

The Walkabout Mother Bin is designed to hold 4000 bushels of grain safely.

Before loading, however, take the following precautions:

1. Ensure each tire is touching the ground for even transfer of weight to the

axles. Park on level ground and check each wheel.

2. Wheel chocks (1) must be place in front of and behind the front tires on

both sides.

3. Clear immediate area of all bystanders.
4. Use the switch (2) on the front of the vertical auger to open the tarp.

NOTE: If the tarp is not connected to the tractor power receptacle, the tarp can

be manually opened or closed with the crank provided. See the Agri-Cover

manual provided to correctly connect the crank to the tarp.

DANGER

Flowing grain traps and suffocates victim in seconds! Victim can die in seconds in flowing

grain!

DANGER

Exercise extreme caution while setting, loading or unloading the Walkabout Mother Bin. The following dangerous

situations exist: Drowning, rotating driveline, rotating auger and crushing or pinching due to moving pivot auger.

IMPORTANT

The instructions below must be followed for safe loading of the Walkabout Mother Bin

Содержание Mother Bin






































































































Результаты поиска

Содержание Mother Bin

Отзывы:

WalkAbout Mother Bin, Руководство оператора и каталог запасных частей, Страница: 28 / 101

Результаты поиска

Содержание Mother Bin

Отзывы: