6
TROUBLE SHOOTING (CONTINUED)
PROBLEM
CAUSE
SOLUTION
Slow capacity on
the discharge side.
(continued)
Improper blower speed.
Relief Valve.
Timer control faulty.
Check belt tension. Engine RPM.
Plugged discharge pipe. Check or
replace.
Replace
Pulsation or erratic
conveying.
Not enough air flow.
Control product flow, adjust air
intake by the suction nozzle
Open vent on railcar
Vacuum blower
overheating.
Low oil level.
Vacuum gauge exceeding 15 HG.
Discharge muffler plugged.
Noisy blower or knocking.
Add oil as required, check for oil
leaks-repair.
Relief valve seized-free up
Clean or replace.
Consult factory or Dealer
Pressure blower
overheating.
Low oil level.
Pressure gauge exceeding 9 psi.
Intake filter plugged.
Add oil as required, check for oil
leaks-repair.
Adjust product regulator.
Discharge line plugged.
Clean or replace.
Hydraulic System
Overheating.
Low oil level.
Oil filter plugged.
Breather plugged.
Poor oil quality.
Check and add oil, check for
leaks.
Replace a maximum of once per
year.
Clean or replace.
Change, consult with factory or
dealer.
Engine shutdown
without warning.
Low oil pressure switch.
High coolant temperature.
Low coolant level switch.
Check oil level(see engine
manual).
Check water level only on level
gauge, DO NOT OPEN CAP
WHEN HOT!
Check level, and check for leaks.
DO NOT OPEN CAP WHEN HOT!
Loss in drive speed.
Belts slipping.
Tighten belts as required, or
replace.
Chem-Veyor Operator’s & Parts Manual # 34-92547-6
21
Содержание Chem-Veyor 2614D
Страница 1: ...OPERATOR S PARTS MANUAL MODEL 2614D...
Страница 2: ......
Страница 4: ......
Страница 27: ......