31
MAINTENANCE SAFETY
•
Follow ALL the operating, maintenance and
safety information in the manual.
•
Support the machine with blocks or safety
stands when changing tires or working be-
neath it.
•
Follow good shop practices:
-
Keep service area clean and dry.
-
Be sure electrical outlets and tools are
properly grounded.
-
Use adequate light for the job at hand.
•
Stop engine or motor, remove ignition key or
lock-out tag-out electrical power and wait for
all moving parts to stop before servicing, ad-
justing, repairing, unplugging or fitting.
•
Use only tools, jacks and hoists of sufficient
capacity for the job.
•
Before servicing, adjusting, repairing or main-
taining unit, ensure that unit power source is
completely shut down and can not start up.
•
Make sure all guards are in place and prop-
erly secured when maintenance work is
completed.
•
Keep hands, feet, hair and clothing away from
all moving and/or rotating parts.
•
Clear the area of bystanders, especially small
children, when carrying out any maintenance
and repairs or making any adjustments.
5
SERVICE AND MAINTENANCE
5.1
SERVICE
5.1.1 FLUIDS AND LUBRICANTS
1.
Grease:
Use an SAE multi-purpose high temperature
grease with extreme pressure (EP) performance
rating meeting or exceeding the NLGI #2 rating for
all requirements.
2.
Blower Oil:
Use Walinga
®
Blower Oil part number 98-13813-5.
Model 3510
Front
1 liter (1.1 qts)
Rear
1.35 liters (1.4 qts)
3.
Storing Lubricants:
Your machine can operate at top efficiency only if
clean lubricants are used. Use clean containers to
handle all lubricants. Store them in an area protect-
ed from dust, moisture and other contaminants.
5.1.2 GREASING
Use the Maintenance Checklist provided to keep a
record of all scheduled maintenance.
1.
Use only a hand-held grease gun for all greas-
ing. Air powered greasing systems can damage
the seals on bearings and lead to early bearing
failure.
2.
Wipe grease fitting with a clean cloth before greas-
ing to avoid injecting dirt and grit.
3.
Replace and repair broken fittings immediately.
4.
If a fitting will not take grease, remove and clean
thoroughly. Also clean lubricant passageway.
Replace fitting if necessary.
Содержание Agri-Vac 3510
