WalimeXPro LED 500, Инструкция по эксплуатации

Страница: 9 / 11

9
•
Clean the device if necessary.
See
Cleaning .
•
Put the device and all demounted elements in one carton and carry and store them according to
the requirements in the technical specifications. See
Technical specifications .
9. Solve problems
Problem Possible reason Remedy
Device is switched on,
but has no function
Power cord is not
plugged or plugged
incorrect
Plug in the power cord correctly
Micro-fuse is defect Change micro-fuse, see Change micro-fuse
Lamps do not light up Lamps are switched
off Switch on lamps, see Screw in and out of
lamp
Lamps are defect Change lamps, but only through an
electrician
10. Maintenance
10.1 Continuous inspections
What you should do?
Before every
operation
With every
change
Check all cables and plugs for damages
In case of damage:
WARNING!
Danger of electric shock
and fire through short-circuit. The device
should be repaired by an electrician
immediately
X
Check, if the socket of the lamps is firmly
In case of damage:
WARNING!
Danger of electric shock
and fire through short-circuit. The device
should be repaired by an electrician
immediately
X
10.2 Cleaning
WARNING
Danger of cutting and splitting through breaking or bursting lamps.
WARNING
Danger of electric shock
−
The contact with moisture or water should be avoided.
−
Unplug the power cord before cleaning the device.
ADVICE: Just use the following specified cleaning supplies.