10
LED 500 Fluorescent Light Cleaning
Housing
Use a microfiber cloth to remove light and
stubborn dirt
Lamps
Wipe off with dust brush or dry, soft cloth
ADVICE:
Don´t clean the lamps with water. Even small
residues on the lamps could lead to bursting
Barndoors
Use a wet microfiber cloth if necessary
10.3
Change lamps
WARNING
Please just use suitable LED for this device. These LED´s should just be changed through an
electrician. It is essential to send back the device to Foto Walser within the warranty time.
10.4
Change micro-fuse
WARNING
Danger of electric shock and fire through short-circuit
A micro-fuse, which is not conform with the required specifications, doesn´t protect against the
overloading of the device.
Please just use a micro-fuse, which is conform with the required specifications. See
Technical
specifications
.
•
Switch off device.
Switch device on and off
.
•
Disconnect from power supply:
Unplug power cord.
•
Open fuse holder:
Use a small screwdriver to lift up the fuse holder carefully and slightly.
•
Pull out the fuse holder with your hands completely out of the slot.
•
Take out the old micro-fuse.
•
Slide the new micro-fuse in the holder.
•
Slide the fuse holder carefully into the slot as far as it goes.
11.
Accessories and options
You can find extensive accessories for your device in our webshop.
12.
Spare parts
Part of the device
Item number
Power cord
12914
