6
1.
Adjust the channel on the backside of the
transmitter. Adjust the levers on e.g. O and N.
2.
Adjust the channel on the backside of the
receiver. Adjust the levers on e.g. O and N.
5.3
Connect the transmitter with the camera
1.
Put the transmitter with the shoe
on the flash socket of your
camera.
2.
Mount the transmitter with the
locking wheel on the shoe.
3.
If your camera should not have a
hot-shoe, please use the included sync cord (E) and connect the
transmitter with your camera or flash shoe.
6.
Operation of the device
6.1
Trigger test button
1. Before starting your work, please check the function of your devices
and trigger your studio flash through the test button on the
transmitter.
Test button
Connection Socket for Sync
Cord Transmitter/Camera
Transmitter
with shoe
Camera
with flash
socket
7
7.
Solve problems
Problem
Possible reason
Remedy
Remote
Trigger has
no function
Cables are not plugged in
firmly
Plug in all cables firmly
Studio flash is switched off
Switch on studio flash
The channel of transmitter
and receiver is not the
same
Please adjust the same
channel on both devices,
see
Adjust channel
Battery on transmitter is
too weak
Change battery, see
Change battery
Battery on receiver is too
weak
Change battery, see
Change battery
8.
Maintenance
8.1
Continuous inspections
What you should do?
Before every
operation
With every
change
Check all cables and plugs for damages
X
8.2
Cleaning
ADVICE: Please only use the following specified cleaning supplies.
The contact with moisture or water should be avoided.
Remote Trigger
Cleaning
Housing
Use a microfiber cloth to remove light and
stubborn dirt
