walimex power shooter 600, Инструкция по эксплуатации

Страница: 41 / 92

41
12. Solve problems
Problem Possible reason Remedy
Flash device is
switched on, but has
no function
The powerpack is not
or only insufficiently
charged/defect.
Charge the powerpack/
replace the powerpack.
The fuse is defective. Replace the fuse, see
“Replacing the fuse”.
Flash shows functions,
but flash triggering not
possible
Battery pack or flash
unit defective.
Contact our service
department
Flash pipe burned
through.
If necessary have the
flash tube replaced by
a skilled electrician.
LC Display shows E0 Problem with operation
temperature
Contact our service
department
LC Display shows E1 No further triggering
possible, cycles .
Contact our service
department
LC Display shows E2 System overheating. Switch off the device
for approx. 10 minutes.
Danger of overloading
LC Display shows E3 Internal voltage inside
the flash is too high
Contact our service
department
LC Display shows
Overload indication,
flash cycles become
slower and slower.
Switch off the device
for approx. 10 minutes.
Danger of overloading