Walimex Pro W1 TTL T-C Canon, Инструкция по эксплуатации

Страница: 49 / 52

46
8. Troubleshooting
1. Unable to trigger flash or camera shutter. Make sure batteries are installed correctly
and Power Switch is turned on. Check if the transmitter and the receiver are set to the
same channel, if the hotshoe mount or connection cable is well connected, or if the
flash triggers are set to the correct mode.
2. Camera shoots but does not focus. Check if the focus mode of the camera or lens is
set to MF. If so, set it to AF.
3. Signal disturbance or shooting interference. Change a different channel on the device.
4. Operating distance limited or flash missing. Check if batteries are exhausted. If so,
change them.
5. No < > is displayed or < > is blinking on the camera viewfinder, though the transmitter
is mounted on the camera and the power switch is turned on. This results from unusual
working of the transmitter. Check and make sure the flash trigger is well connected to
the camera through hot shoe Camera Connection, then power the Transmitter on again.
9. Maintaining the device
WARNING
■ Avoid sudden drops. The device may fail to work after strong shocks,
impacts, or excess stress.
■
Keep dry.
The product isn‘t water-proof. Malfunction, rust, and corrosion may
occur and go beyond repair if soaked in water or exposed to high humidity.
■ Avoid sudden temperature changes. Condensation happens if sudden
temperature changes such as the circumstance when taking the transceiver
out of a building with higher temperature to outside in winter. Please put the
transceiver in a handbag or plastic bag beforehand.
■ Keep away from strong magnetic field. The strong static or magnetic field
produced by devices such as radio transmitters leads to malfunction.
uctions for maintaining your device.
■ Please use only spare parts which conform with the required specifications.
10. Waste disposal and protection of the environment
Dispose of the device at a local waste disposal site or at an electrical device shop.
This service is free of charge.
21701_walimex pro Funkauslöser W1 TTL T-C_BDA.indd 46 3/12/2018 1:15:17 PM