Walimex Pro W1 TTL T-C Canon, Инструкция по эксплуатации

Страница: 43 / 52

40
Custom
Func-
tions No.
Functions
Setting
Signs
Settings and Description
C.Fn-05
Minimum
power
output in M/
Multimode
1/128
The minimum power output in M/
Multi mode is 1/128
1/256
The minimum power output in M/
Multi mode is 1/256
C.Fn-06
Number of
groups
03 A/B/C
05 A/B/C/D/E
C.Fn-07 Beeper
-- OFF
on ON
C.Fn-08
Mandatory
send the
setting value
ON/OFF
--
After the setting value were chan-
ged, it will send the setting value.
on
It will send the setting value
mandatory before the trigger flash,
even the setting value hasn´t been
changed.
Double-click the <CH> button to turn on/off the modelling lamp of the receive end.
Press the <TEST> button to turn on the flash trigger. When the status indicator
lamp blinks two times, it means the effective remote distance is below 30 meters,
thus the transmitter and receiver can communicate normally no matter how near
they are.
NOTICE
Second curtain sync cannot be set through the camera‘s external flash functions
setting. When using second curtain sync, the effective shutter speed range is from
1/30s to 30s. When shutter speed is set as buLb or is quicker than 1/30s, the set-
tings are invalid. After being turned on, second curtain sync is effective even though
HSS has been set and the shutter speed range is from 30s to 1/30s. After second
curtain sync is turned on, synchronization delay settings are invalid.
21701_walimex pro Funkauslöser W1 TTL T-C_BDA.indd 40 3/12/2018 1:15:17 PM