44
Manual 23091 LED Niova 150-F Pro 150W Bi Color
To insert a diffuser and / or the barn doors, proceed as follows:
1.
Secure the lamp (1) on the stand by tightening the two
clamping levers (4). Also fix all screws of the stand and the
fixing screw of the bracket (9) so that the lamp cannot turn or
tilt.
If you have not mounted the lamp on a stand, place it on a
work table with the luminous surface facing upwards and
make sure that the clamping levers (4) are not in the way.
2.
Release one of the two retaining bars (5) by pressing the
corresponding button (14) on the back of the device. The
retaining latch will fall back into the housing by itself or can be
pushed in with a finger.
3.
Carefully slide the open side of the diffuser into the rear, inner
of the two guiding rails (6). Make sure to insert the diffuser
into the upper as well as the lower rail of the housing at the
same time. Diffusers must always be mounted in the inner
guiding rail.
4.
Carefully slide the barn doors with their frame into the front of
the two guiding rails (6). Barn doors must always be mounted
in the front, outer guiding rail!
5.
Push the diffuser and / or barn doors along the guiding rails
(6) until they touch the closed retaining bar (5) on the other
side.
6.
Now close the other retaining bar (5) by grasping it with a
fingernail and pulling it out of the housing until it snaps into
place.
