E
34
Group code Setting on the remote control
Group 1 (top LED must light)
Group 2
(2. LED from top must light)
Group 3
(3. LED from top must light)
Group 4
(4. LED from top must light)
NOTE
Flash settings can only be made if the set-
tings between transmitter and receiver in
the flash unit are matching. The test button
on the transmitter can be actuated at any
time and will trigger a flash.
Pre-flash settings
Setting the time:
1. Press the SLAVE button for about 8 sec.
2. The display shows “t”.
3. Use the arrow keys to set the time (up to
5 sec.) until the flash should be triggered.
Display t
1 2 3 4 5
Time in seconds
1 2 3 4 5
Setting pre-flash suppression
1. Press the SLAVE button for about 4 sec.
2. The display shows “c”.
3. Use the arrow keys to adjust the flash for
triggering, e.g. up to the 7th pre-flash.
Setting time based pre-flash suppression
1. Press the SLAVE button for about 8 sec.
2. The display shows “t”.
3. Press the SLAVE button 2 times to access
the adjustment “G..” (group).
4. Use the arrow keys to block flash
triggering for up to 18 milliseconds.
With a setting of b5, the time is blocked for
10 milliseconds.
Display b
1 2 3 4 5 6 7 8 9
Time (millisec.)
2 4 6 8 10 12 14 16 18
