E
30
1. Demount protection cap:
• Remove safety cap from unlocking lever.
• Push back unlocking lever and keep
pressed.
• Turn protection cap anticlockwise as far
as it will go and take off from the device.
• Release the unlocking lever.
2. Mount protection cap:
• Let the device cool down
WARNING
Fire danger through overheating.
Danger of burning. Let the device cool
down for approx. 30 minutes.
• Push back unlocking lever and keep
pressed.
• Plug in the protection cap into the three
openings on the device, turn it clockwise
and listen for the cap to snap into place.
• Release the unlocking lever.
• Stick the safety cap onto the unlocking
lever.
6. Mount and demount reflector
WARNING
Posterior danger of bursting of flash tube
Make sure not to touch the flash tube with
bare hands accidentally.
Openings for reflector and protection cap
1. Mount reflector:
• Switch off device.
See Switch the device on and off.
• Let the device cool down.
WARNING
Danger of burning on reflector, modeling
lamp and flash tube. Please let the device
cool down for approx. 30 minutes.
• Demount protection cap.
See Demount and mount protection cap.
• Push back unlocking lever and keep
pressed.
• Plug the reflector into the openings, so
that the opening for the reflex umbrella
(optional) faces downwards.
• Turn the reflector clockwise and listen for
the reflector to snap into place.
• Release the unlocking lever.
• Stick the safety cap onto the unlocking
lever.
