16
17
1.2 Identifications in these instructions for use
Identification
Meaning
Draws your attention to the dealing with and the
effect of safety information.
WARNING
Draws you attention to a dangerous situation, which
can result in
severe
or even
fatal
injury, if not
avoided.
NOTE
Draws your attention to possible material damage and
other important information in connection with your
equipment.
2. Important safety notes
WARNING
Danger of electric shock, burn hazard
Please note that the device is still connected with the supply voltage
even if it is switched off. Just after disconnecting the device from the
power supply through pulling out the power cable, the device is actually
de-energized.
■
Disconnect from power supply by unplugging the power cord before
starting any maintenance.
■
Disconnect from power supply by unplugging the power cord when
the device is not in use for a longer time.
WARNING
Danger of suffocation caused by small parts
Keep the device out of the reach of children and pets.
WARNING
Danger of electric shock, fire through short-circuit
A short-circuit could be caused through broken cables and through
humidity or moisture. A short circuit can warm up the conductors, so that
their isolation or the conductors themselves may melt.
This could lead to fire.
■
Don´t operate the device with wet hands or feet.
■
Operate the device only in dry rooms.
■
Don´t operate the device outdoors.
■
Please only follow this instruction manual for cleaning the device.
■
Make sure that cables and conductors won´t be damaged. Damages
could be caused through heat impact, chemical influence or through
mechanical impacts as rubbing, bending, tearing, rolling over or nibbling
animals.
■
Prevent your device against toppling. In case of toppling, please let an
electrician check the device before switching on again.
■
If your device should be damaged or broken or if you notice a burning
smell:
Disconnect the power supply by pulling out the power cord immediately.
■
Never operate your device with damaged housing or damaged power
cord.
■
Don´t open the device.
■
Never repair the device on your own. The device should only be
repaired by electricians.
■
Please follow this instruction manual for maintaining your device.
■
Please trigger the flash head through the test button before starting any
operation or maintenance arrangement.