30
31
6.2 Modell:21500 walimex pro LED Ringleuchte 500 Bi Color RLL-500BV
1. Install the L shape light holder
bracket (3) with bracket adjustment
knob (6) on the light at the same
height.
2. Put the remaining part of the hori-
zontal camera rail (15) into L shape
bracket (3) and tighten the bracket
fixing screws and adapter (16).
3. Install the camera onto the camera
bracket (3) and tighten with the
camera fixing screw (2).
4. Check the secure fixation of all
screws.
5. The ringlight is ready for use.
NOTE
Please follow the user information issued by the tripod manufacturer.
WARNING
Only mount the device on a tripod that has been designed for the weight and
dimensions of the device.
See technical specifications.
Make sure that the tripod with the mounted device is safe against tipping over or
slipping.
NOTE
When using the horizontal camera mounting rail, be careful not to lose the pla-
stic adapter rings of the mounting screws (16). The adapter rings are not tightly
connected to the screw and can therefore easily be lost. Without these adapter
rings, the camera housing can not be secured to the L-shaped lamp holder!
5. Quick reference guide
6. Preparing the device for use / mounting on a stand
page 30
7.
Power
supply
page
32
8. Operating the device
page 33
10.
Troubleshooting
page
35
NOTE
Detailed instructions for the following activities can be found in the relevant sec-
tions of these instructions for use. Strictly follow the sequence of the following
activities during first time use, to prevent damage to the device.
WARNING
With any action you take you should pay attention to the safety notes in
the corresponding paragraphs.
6. Preparing the devices for use
6.1 Model: 21499 walimex pro LED ringlight 380 Bi Color RLL-380BV
1. Install the L shape light holder
bracket (3) with bracket adjustment
knob (6) on the light.
2. Install the light with the stand holder
(14) on a 1/4 or 3/8 inch thread on
a suitable lamp stand.
3. Install the camera onto the camera
bracket (3) and tighten with the
camera fixing screw (2).
4. Check the secure fixation of all
screws.
5. The ringlight is ready for use.
1.
Please install the L shape camera
bracket with bracket adjustment
knob on the light.
2.
Install the light on light stand.
3.
Install the camera onto the camera
bracket and tighten with the
Operating Instruction
bracket and tighten with the
camera fixing knob.
4.
Make sure the power switch is OFF
before connecting the power cable
or batteries.
1. Please install the L shape camera
bracket with bracket adjustment
knob on the light at the same
height.
2. Put the remaining part of the
camera bracket into L shape
bracket and tighten the bracket
fixing knob.
3. Install the light on light stand.
4. Install the camera onto the camera
bracket and tighten with the
camera fixing knob.
5. Make sure the power switch is OFF
before connecting the power cable
or batteries.
Operating Instruction
1. Please install the L shape camera
bracket with bracket adjustment
knob on the light at the same
height.
2. Put the remaining part of the
camera bracket into L shape
bracket and tighten the bracket
fixing knob.
3. Install the light on light stand.
4. Install the camera onto the camera
bracket and tighten with the
camera fixing knob.
5. Make sure the power switch is OFF
before connecting the power cable
or batteries.
Operating Instruction
