12
13
• Please check, if the delivery is undamaged.
ADVICE:
If the delivery should be uncomplete or damaged,
please contact
4. Overview about the parts
1. Ceiling Mount
2. Guide Rails
3. Pantographs with carriage roller
4. Lift Mechanism
5. 5/8 Spigot Connection for studio device
6. Safety Cable
7. Carriage Roller
5. Quick start guide
ADVICE:
The detailed instruction for the following operations can be found in the respective chapters
in this instruction manual.
Keep the sequences of the following operation steps when using the device for the first time
to avoid damages on the device.
WARNING
Please note the safety notes in the respective chapters throughout operation.
• Mount Ceiling Rail System
• Mount device
• Adjust position
6. Mount Ceiling Rail System and prepare for operation
6.1 Mount Ceiling Rail System
ADVICE: The mounting of the Ceiling Rail System should be carried out with at least 2
persons.
CAUTION
Danger of falling parts. The weight of the Ceiling Rail System is approx. 24,5 kg. A load
capacity of 6 kg per pantograph should not be exceeded. Please pay attention to the load
capacity of your ceiling.
Advice:
the weight of your studio flashes is given in the appropriate
user manual.
— The Ceiling Rail System should just be mounted on ceilings, which can ensure enough
stability.
— Mount the Ceiling Rail System securely and sturdily. Tighten all screws of the Ceiling rail
System and the mounting screws of the rails after repeated use. Check all mountings
regularly, if they are still tightened securely.
— When mounting the Ceiling Rail System on the ceiling, please pay attention to possibly
underneath mounted power cables or water pipes – Danger of electric shock.
1
2
7
3
4
5
6
Step I
Insert the ceiling mount backwards and frontwards on
the guide rail. Afterwards, please mark your bore holes
while holding the guide rail on the ceiling. After boring
your bore holes, you can mount the first guide rail on the
ceiling. Please treat the opposite guide rail with ceiling
mount on the same way.
Step II
Insert 2 carriage rollers on each guide rail of the diagonal
rails. CAUTION: Protect the carriage rollers immediately
with end stoppers at the end of the guide rails as to avoid
a rolling out. Afterwards, insert the guide rail with the
help of the carriage rollers in the ceiling guide rail and
protect it immediately with end stoppers.
ADVICE: Make sure, that the end stoppers are mounted
securely and sturdily.
Strep III
On the diagonal rails, which were mounted in the last
step, you can now insert your pantographs with carriage
rollers due to your requirements. You have to use at least
one cable runner per carriage roller. Protect them with end
stoppers at their ends. ADVICE: Make sure, that the end
stoppers are mounted securely and sturdily.
A Guide Rail with ceiling mount
B Guide Rail diagonal
C Pantographs with carriage rollers
D Cable Runner
E End Stopper
6.2 Mount studio device
CAUTION
Danger of crashing and entrapment through hanging down or falling down devices. A load
capacity of 6 kg per pantograph should not be exceeded.
See Technical Specifications.
— Make sure, that the devices are always mounted securely and sturdily and that the safety
cable is installed.
— Avoid placing cables where they can be tripped over. The device could fall down.
— Avoid bringing hairs, clothes and loose pieces into the pantographs or into the lifting
mechanism.
— Make sure not to bring your fingers into the lifting mechanism during operation and
mounting – Danger of entrapment.
— Don´t touch the guide rails during mounting, cleaning, operation and position change or
when moving the pantographs – Danger of entrapment.
E
D
C
B
A
