±3°
-5°
10°
B
A
A
A
Install the Wall Plate to the Wall
1. If installing this product on a concrete wall, mark the position with Bubble Level E & pencil on the wall.
1. If installing this product on a wood stud, mark the position with Bubble Level E & pencil on the wall.
Loosen the Bolt as the image shown to adjust your TV to a horizontal level, retighten the Bolt with a screwdriver.
Loosen the Bolt as the image shown to adjust the VESA Plate
B
tilt angle using a screwdriver. (Tilt +10°/-5°)
Loosen the Bolt as the image shown to release the Bolt and Washer. Put the assembled TV/Monitor onto Arm
A
and ensure stability.
Tighten the VESA Plate B using the Bolt and Washer.
3. Insert the Anchor W-D
into the mounting holes. Attach the Wall Plate & Articulating Arms
A
to the concrete
wall and tighten using Screw W-A .
3.Attach the Wall Plate & Articulating Arms A
to the wood stud and tighten using Screw W-A .
2
3
4
B
A
E
E
A
3
E
E
A
A
A
B
B
60 mm
Ø4 mm
Ø 4 mm
W-A
3
Ø 10 mm
60 mm
Ø 10 mm
X
W-A
W-D
W-A
W-D
W-D
W-A
W-D
W-A
W-A
2. Drill 0.16"(4mm) diameter x 2.36”(60mm) length holes at the marked position.
2. Drill 0.39
"(10mm) diameter x 2.36"(60mm)
length holes at the marked position.
Option A: Wood Stud
Option B: Brick /Concrete Wall
