7
6.
All air for burner combustion is supplied from underneath the unit. The legs must always be fitted
and no obstructions placed on the underside or around the base of the unit, as obstructions will
cause incorrect operation and / or failure of the appliance.
NOTE: Do not obstruct or block the appliances flue. Never directly connect a ventilation
system to the appliance flue outlet.
Clearances
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
Any gas burning appliance requires adequate clearance and ventilation for optimum and trouble-free
operation. The following minimum installation clearances are to be adhered to:
NOTE: In order to facilitate easy operation, drainage and servicing of the appliance, a
minimum of 600 mm clearance should be maintained at the front of the appliance.
Assembly
This model is delivered completely assembled. Ensure that the legs are securely attached.
NOTE:
•
This appliance is fitted with adjustable feet to enable it to be positioned securely and
level on uneven floors. This should be carried out on completion of the gas
connection. Refer to the 'Gas Connection Section'.
•
This appliance can also be fitted with rear rollers to enable the appliance to be easily
moved for positioning and cleaning purposes. If desired, these rollers are supplied in
the packaging, with the appliance. See below for fitting instructions.
Optional Accessories (Refer to Replacement Parts List)
•
Plinth Kit. For installation details, refer to the instructions supplied with each kit.
•
The appliance rear leg housings can be fitted with:-
Adjustable feet to assist with levelling of the appliance on uneven floors.
Rear rollers to enable the appliance to be easily moved for positioning and cleaning purposes.
Combustible Surface
Non Combustible Surface
Left / Right hand side
50 mm
0 mm
Rear
50 mm
0 mm
Installation
