Waldorf FN8120GE, Инструкция по установке и эксплуатации, Страница: 29 / 37

27
Controller Advanced Programming Mode
The following Parameters can be accessed and adjusted in the Advanced Programming Mode:-

Timing Mode (Straight or Flexi cook time).

Temperature Offset (Calibration Setting) -14° to +14°.

Temperature Display Mode (Temp display or prompt display).

Programming the Melt Cycle.

Setting the Temperature Units (either °C or °F).

System Programmable Default Settings.
1. Press the ‘ON / OFF’ key to turn ‘ON’ fryer controller.
2. Programme Key ‘P’ and ‘Timer 1’ key together to enter
‘Advanced Programming Mode’.
3. If ‘LoC’ is displayed , password protection is turned
‘ON’ and control panel is locked. Unlock the control
panel, refer to ‘Controller Basic Programming Mode’ -
‘Entering the Controller Basic Settings’, and repeat
from Item 2 above.
Timing Mode
1. One of the following options will display:-
Straight Cook Time
Straight cook time refers to real time cooking.
Flexible Cook Time
Cook time can be automatically adjusted to
compensate for size of load being cooked.
2. To change ‘Timing Mode’, press either ‘Timer 1’ or
‘Timer 3’ key.
3. Press Program Key ‘P’ to confirm options, the change
will be accepted and display will step on to
‘ Temperature Offset’ parameter.
Press
Together
Factory Default Settings
TIMING MODE
TEMPERATURE
OFFSET
TEMPERATURE
DISPLAY MODE
PROGRAMMING
THE MELT CYCLE
SETTING THE
TEMPERATURE UNITS
IDLE MODE
from
-14
°
to +14
°
either
't -1’
or
't -0’
either
‘CY L’, ‘CY.S’
or
'CY o’
either
'°F’
or
'°C’ .