55
Activating the repeater function
ENG
12. Activating the repeater
function
If the range of one module is no longer
sufficient, another module can be used as
repeater.
All telegrams, including those from external
products, will be received and forwarded.
NOTE:
Use the repeater function only if the
range of a module is in the limiting range.
Keep the number of repeaters low, as the
performance may drop due to increased
traffic.
Fig. 69: DIP switch position for the repeater
function
X
Disconnect the luminaire from the
power supply.
X
Set the DIP switch no. 4 to the "ON"
position.
NOTE:
The position of the other DIP
switches is irrelevant for this function.
X
Reconnect the light to the power sup-
ply.
13. Performing a reset
A reset resets the module to the factory
defaults. All saved luminaires and transmit-
ters will be deleted, the lighting level reset
to background lighting, and the external
function deactivated.
Fig. 70: "learn" key
X
Press the "learn" key and keep the key
depressed for at least 15 seconds until
the "learn" and "send" LEDs are perma-
nently lit, see Fig. 70.
