34
Positioning
ENG
3.7 Inserting the SD card
SD
Fig. 13: Inserting the SD card.
X
Insert the
SD
memory card into the
slot of the TIME module, siehe Fig. 13.
After about ten seconds, the green LED
in the TIME module will go out.
The contents of the memory card is
read out at regular intervals.
3.8 Mounting the cover on the
light head
f
e
Fig. 14: Mounting the cover
X
Insert a cover
e
with the hooks on the
bottom side of the cover into the eyelets
on the light head and press the cover
firmly, siehe Fig. 14.
X
Fasten the cover with the screw
f
.
3.9 Mounting the second light head
X
Repeat steps 3.3 to 3.8 to mount the
second light head.
4. Positioning
Depending on the power class of the lumi-
naire, it can meet different workplace requi-
rements.
A
C
D
B
E
Fig. 15: Positioning the TWIN-U
A
C
D
E
B
Fig. 16: Positioning the TWIN-T
No.
Designation
A
Window
B
Work area
C
Luminaire
D
Sensors
E
Approximate detection range of
the sensors
X
Position the light such that the largest
possible area of the work area is lit.
