21
Installation
ENG
Mounting the luminaire frame to the ceiling
Fig. 4: Screwing the luminaire frame to the
ceiling.
X
Screw the luminaire frame to the ceiling
using four suitable screws, see Fig. 4.
3.2 Connection
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X
Connection by a skilled electrician
only.
X
Compare the mains voltage with
the nominal voltage and the fre-
quency specified on the rating
plate and make sure that they are
identical.
D2
L
N
D1
Fig. 5: Connecting the luminaire.
X
Connect the wires of the connecting
cable to the terminal on the luminaire
frame, see Fig. 5.
C
D
Fig. 6: Mounting the strain relief.
X
Fix the connecting cable
C
with the
strain relief
D
3.3 Mounting the direct light ele-
ment
X
Remove the protective film.
E
Fig. 7: Mounting the direct light element.
X
Hang the direct light element into the
two hooks
E
located on the luminaire
frame, see Fig. 7.
F
G
Fig. 8: Connecting the direct light element.
X
Connect the socket
F
to the plug
G
at
the direct light element.