34
Instructions For Use Wall Mounted Uplighter DUW 2xx(D)
"ATARO"
ENG
Mounting part 5 - Connecting the light head
After connecting
See Fig. 24.
r) Fasten and engage the cover
[24.4] in the connecting area.
s) Fasten the two lateral covers
[24.5] on the fastening rail
[24.3].
t) Attach the lamp cover [24.6] to
the chassis [24.1].
Fig. 22c
(DUW 2xx
/D
)
Fig. 22a
Fig. 24
24.1
24.6
24.3
24.4
Fig. 22b
(DUW 2xx)
24.5
! WARNING
Risk of injury
When not secured, the uplighter
may fall down.
¾
Tighten both oval-head screws
[14.8] and circlips [14.9] at the
underside of the light head to
fasten it (see Fig. 14a).
Connecting the
light head
Note:
It is recommended prebend-
ing the cable, before inserting the
chassis into the cover (see Fig. 23).
See Figs. 22a to 22c.
o) Connect the earth conductor
(flat socket) to the light head
(Fig. 22a).
p) Establish a connection between
the indoor installation and the
light head (Fig. 22b or 22c).
q) Store the cable in the fastening
rail [24.3].
Fig. 23
