500.0024-A
5
Subject to technical changes
Operation
3.1.
Opening the safe
1.
First, press the rotary opening handle
counterclockwise into the "closed"
position to make sure that the lock bolt is
relieved of pressure.
2.
Press the ENTER key and the display will
show the
"Date, time saved" message.
3.
Press the ENTER key repeatedly, and the
display will show the
"Open menu"
message; confirm this again with the
ENTER key.
4.
The display
shows the "Lock code 1"
message to indicate that user
code 1
or 2 for lock 1 (
11
2233
10
or
11
2233
20
)
must be entered.
If the code was entered
correctly, the display shows the
"Lock 1
is opening" message, followed by
"Lock is open". The display
then
shows the
"Lock code 2" message to
indicate that user c
ode 1 or 2 for lock 2
(
12
2233
10
or
12
2233
20
) must be
entered.
If the code was entered
correctly, the display shows the
"Lock 2
is opening" message, followed by
"Locks are open, open bolts".
The
rotary opening handle can only be
moved clockwise after the second "Open
bolts" message.
5.
Open the door (display shows
"Released").
NOTE:
Every keystroke is acknowledged by an acoustic signal. If the interval between two
numeric inputs is more than 25 seconds, the display switches off and you must input the
entire code from the beginning again. If you make an incorrect entry, you can delete the
entire code with the CLR key and re-enter your code.
