500.0037-A
1
Technical alterations reserved
General information
Every WALDIS Basic 480 safe is equipped with an electronic security lock. To operate the
lock, please use the 500.0021 instruction manuals enclosed. You can find the
comprehensive instruction manual, produced by the manufacturer, at: www.carl-
wittkopp.com (Primor 1000/3000).
1.1.
Safety instructions
PLEASE NOTE:
Please make sure that no body parts get trapped between the doors and
the case when opening and closing the doors!
PLEASE NOTE:
Before closing the doors, make sure that the handle is in the open
position and the bolt is retracted!
1.2.
Weight
1.3.
Regulations and insurance
For all safes with a net weight of less than 1000 kg, professional anchoring either during
construction or by the client is a minimum requirement of the EN1143-1 standard. For this
reason, all safes are equipped with 3 bore holes (2 on the back wall and 1 on the base)
with a diameter of 16.5 mm. If it is not possible to anchor the safe in accordance with
current regulations, the property insurance company must be informed and an alternative
solution must be found.
PLEASE NOTE:
The safe’s warranty and certification
terminate after attempted break-ins,
fires and unauthorised interference with the structure!
Model
Weight (kg)
Basic 480
ca. 125
