500.0022-A
6
Subject to technical changes
9.
Press the Info key two or three times to exit the menu.
10.
With the door open, move the rotary opening handle counterclockwise into the
"closed" position (lock closes automatically).
11.
Enter the newly programmed code and open the lock again by moving the rotary
opening handle clockwise.
12.
Repeat steps 10 and 11 to make sure that the new code was accepted by the lock,
and that it works.
13.
If the test opening of the lock was successful, the new code has been programmed
and the safe can be closed.
NOTE:
If errors occur while making the change, the old code remains valid. You must start
the programming procedure from the beginning again.
Setting the time and date
1.
With the door open and the rotary opening handle in the "open" position, press the
Mode key; the display shows PRG-MOD.
2.
Input the existing master code, confirm with the Enter key, and the display will show
TIME.
3.
Confirm this with the Enter key.
4.
Use the numeric keys to input the current time and confirm with the Enter key.
5.
The display shows SAVE YES?; confirm with the Enter key, and the display shows:
ACCEPT.
6.
Use the arrow key to scroll to DATE and confirm with the Enter key.
7.
Use the numeric keys to input the current date, confirm with the Enter key, and the
display shows ACCEPT. The time and date have now been set.
8.
Press the Info key two or three times to exit the menu.
Replacing the battery
1.
Purchase the batteries (3 x 1.5 V AA
alkaline batteries - LR6, or 1.5 V AA lithium
batteries - FR6).
Note the expiration date!
2.
Carefully unscrew the flathead screw
(positioned centrally under the input unit)
out of the housing (2 mm Allen key).
